|
envelope (with apen).7 B PaperfeedingPaper jam, orimproper paperejectionCredit Card sizepaperDue to papersetting in the ASFwith the longerside down, the LFroller cannot catchthe paper,preventing paperfeeding.- Open thescanning unit,and remove thejammed paper.- Set a sheet ofCredit Card sizepaper in the ASFwith the shorterside down, andpress theStop/Resetbutton.- Paper jam error- Paper cannotbe fed- Cannot print8 B ImagequalitySmearing onprinted sideThe edge of paperrises due whenpaper is curled,causing the inkcartridge to rubagainst the printedsurface of paper.- Correct the papercurl.- Set the paperthickness leverfor thick paper.- Recommend theuser to print inthe print qualityassurance area.- Smear on theprinted side ofpaper- Cannot printproperly- Paper edgecrease9 B ImagequalitySmearing onthe backside, oraddress side ofpostcardsWhen borderlessprinting isconductedcontinuously, inkmist attaches to theribs on the platen,and is transferredto the backside ofthe followingpaper.- Perform Bottomplate cleaning *1from the MPdriver.- Clean the ribs onthe platen withcotton swabs /buds *2 .Plus DoubleSided>- Smears on thealready printedside whenprinting theother sidethe address sideof postcards>- Smears on theaddress sidethe message sideof postcards>- Smears on thebackside10 C ImagequalityHorizontallines or unevenprint density atthe trailingedge of paperWhen the paperend comes off thepinch roller,printing isperformed withoutthe paper beingheld, preventingthe ink drops frombeing ejected in thecorrect positions,resulting inunevenness.Note: Theproblems islessnoticeablethan that oftheMP110 /MP130.- Recommendprinting in theprint qualityassurance area.- Change the printquality fromStandard to Highmode.- Try other paper(PP-101).- Cannot print tothe bottomedge of paper- Line or unevenprint densityappear in thetrailing edge ofpaper- Cannot printproperly2-13 PreviousNext |