Canon PIXMA MP620 Series Getting Started

Also see for PIXMA MP620 series: Supplementary guide On-screen manual Manual Manual Manual

1?J WPS settingPush button methodPIN methodlit Push button methodConnect to a wireless LANaccess point supporting theWPS push button method.Next'i'~, Push button methodPrepare a wireless LANaccess point. For details, seethe access point manual.When ready, press 1!13 ofthe device.Start connectionFollowing IS completed.WPS settingMacintoshWindowsNext, read "Install the Software" !• A timeout error occurs if setup is not completed within two minutes. When the timeout error screenappears, refer to "5.12 The Timeout error screen is displayed during WPS setup" in the printedmanual: Network Setup Troubleshooting.• The WPS button may be named differently depending on your access point. For details, refer to themanual of your access point.The completion screen appears on the LCD of the machine, then the LAN settings screen returns.When the access point is ready, press the OK button on the machine, then press theWPS button on the access point within two minutes.~t;;J;;IPress the OK button.To use the PIN code method for setup, select PIN methodon step 0, then press the OK button. Follow the on-screen isinstructions to operate the machine and access point. Whenthe setup is complete, the completion screen appears thenthe LAN settings screen returns. A timeout error occurs ifsetup is not completed within 10 minutes. If the timeout errorscreen appears, refer to "5.12 The Timeout error screen isdisplayed during WPS setup" in the printed manual: NetworkSetup Troubleshooting.Select Push buttonmethod, then press theOK button.~t;;J;;I