Canon PIXMA MP620 Series Getting Started

Also see for PIXMA MP620 series: Supplementary guide On-screen manual Manual Manual Manual

flhJ:" • ',; %ll\* »', ,RtltorjlJS the Machine to the Factory Settings o Select Yes and press the OK button.Do you want to restoreLAN setting. to thefactory settings?1 Initializing using the machine's Operation Panel Ve.NoFollow these steps to restore the machine's network settings to factory defaults,o Open the Operation Panel on the machine, use the Easy-ScrollWheel or the -4 or • button to select Settings, then press theOK button.iRemaining ink voill Introduction(j) Confirm that the right screen appears.After a while, the LAN settings screen returns.• The machine's network settings are restored to factory defaults.Following i. completed.Reset LAN SIttingse Select Device settings and press the OK button.€) Select LAN settings and press the OK button,o Select Reset LAN settings and press the OK button." Setting.'. I~I .,JJJDevice setting. 2/3Perform various .etting•.\/- Device settingsPlain paper feed setting.Print .etting.LAN settingsAdVance,f.ettings----Mobile phone print .ettingPictBridga print .etting. ---Limguige sil8ctiOoi - - _. - .--_.--,.-----.,'~ LAN .ettingsChange wireless/wiredWireless LAN settingsWirele.s LAN setting listWired LAN .etting ~stIPv4/IPv6 setting'WSD settingReset LAN settings• Factory DefaultActiveBJNPSETUPDisableIPaddress: 192.168.1.123 (default)• Subnet mask: 255.255.255.0• Default gateway: 0.0.0.0Inactive• IPaddress: 192.168.1.123 (default)• Subnet mask: 255.255.255.0• Default ateway: 0.0.0.07