If the following screen appears If the following screen appearsThe roJkl' access ~nu were delectedStIKt che ~CceS5 point to connKt to, W did (Connectl.IIIIIIIIIIIIIIIIIIIIIIThe printer In the network could not ~ detuted .utotn~lcalty.Set lhe IP addreu of the printer to be. used.TCPIIPSettingWhen the Set Printer IP Address screen appears, click Connect.If the machine is detected automatically, the Set Printer IP Address screendoes not appear.• If no connection is established even after Connect is clicked, refer to "5.6 TheSet Printer IP Address screen is displayed during setup" in the printed manual:Network Setup Troubleshooting.w _When the Access Points screen appears, select an access point touse, then click Connect.(~:~-:o~:'~~;~'-~-~-- 0II you "fled to configure the pttnttr MtworX settings manually to (onn& tothe access point, dkk tM~nl.laJ Setup).® ( Manual Setup)When an access point is detected automatically, the Access Points screendoes not appear.• If you want to select an access point manually, or if the target access pointis not displayed in the list, or if an error message appears, refer to "5 Thefollowing screen is displayed during setup" in the printed manual: NetworkSetup Troubleshooting.• To connect to the access point with WEP, WPA or WPA2 displayed in theEncryption column, enter the network password, then click Connect. Fordetails on network passwords, refer to "3.1 About Network Key (Windows)/Network Password (Macintosh)" in the printed manual: Network SetupTroubleshooting.~---------------w _
