Canon PIXMA MX860 series Getting Started

Also see for PIXMA MX860 series: Supplementary guide On-screen manual Manual Manual Service manual

The admin password set to the machine was forgotten6This screen is displayed when WPS setup is not completed within the specified time (2 minutes forthe push button method, and 10 minutes for the PIN code method). Retry following the proceduresbelow.• When using the push button methodo Press the OK button.The Push button method screen returns.o When the access point is ready, press the OK button on the machine, then press the WPSbutton on the access point within two minutes.• When using the PIN code methodo Press the OK button.The WPS setting screen returns.o Select PIN code method and press the OK button.A new PIN code appears.€) Set the new PIN code to the access point or computer.• Restore the machine to the factory default and set up the machine again. For details, refer to"Restoring the Machine to the Factory Settings" on page 7.To set up the machine again, follow the procedures in "Install the Software" and onward in theprinted manual: Getting Started .• If you have changed the connection method via Change WLAN/LAN in the machine's LANsetting, you need to setup the machine again. To do so, follow the procedures in "Install theSoftware" and onward in the printed manual: Getting Started.Restore the machine setting to factory default.All settings previously set will be lost after initialization. Set up the machine again to use it. Fordetails, refer to "6.1 Re-setting the machine" on page 6.• ~.......8 ~To change the port name, click View Setup Results in the Setup Completion dialog box, thenclick Set Port Name.The Set Port Name dialog box is displayed, where you specify the port name. By changing theport name, you can change the name of the machine. When you set up an additional computer touse the machine whose port name you changed, the machine is displayed with the changed portname. When two or more computers are set up, the changed name is displayed. When multiplecomputers or machines are present, this can be used to change the name to one that is easy toremember.Port NamePort names should consist of alphanumeric characters and be no longer than 21 characters,excluding the prefix. The port name includes the fixed prefix "CNBJNP_", which you do not needto enter.