Installing the Battery Pack/CF card (continued)22Battery Status SymbolsThe following icons indicate the battery status on the display panel.These icons will not appear while the camera is powered with acompact power adapter.3 Insert the CF card.z The label side of the CF card should face the battery compartment.z Push the card in until the CF card eject button fully extends. Toremove the CF card, push the CF card eject button and pull thecard out.4 Slide the CF card/battery cover closed.z When the indicator blinks, the camera is writing, reading, erasingor transmitting an image to or from the card. Do not perform thefollowing, or image data may be lost or corrupted:• Do not shake the camera.• Do not turn off the power or open the CF card/battery cover.z You are recommended to use CF cards that have beenformatted in your camera (p. 139). The card supplied with thecamera may be used without further formatting.z Remove the battery pack when the camera is not in use.z See CF Cards and Estimated Capacities (Recordable Images)(p. 191).z See Battery Performance (p. 190).: Sufficient battery charge: Low battery: Replace or recharge batteryDownloaded From camera-usermanual.com Canon Manuals
