Canon Pixma G3060 Series Online Manual

Also see for Pixma G3060 Series: Getting started Getting started Getting started Online manual Online manual

Printer Does Not Pick up or Feed the Paper/"No Paper" ErrorCheck1 Make sure paper is loaded.Loading PaperCheck2 When loading paper, consider the following.• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper loadlimit.However, paper may not feed correctly at the maximum capacity, depending on the type of paper orenvironmental conditions (very high or low temperature and humidity). In such cases, reduce the amount ofpaper you load at a time to less than half of the paper load limit.• Always load the paper in portrait orientation, regardless of the printing orientation.• When you load the paper on the rear tray, place the print side facing UP and align the right and left paperguides with the paper stack.Loading PaperCheck3 Is paper too thick or curled?Unsupported Media TypesCheck4 When loading envelopes, consider the following.When printing on envelopes, see Loading Envelopes, and prepare the envelopes before printing.Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed inlandscape orientation, they will not feed properly.Check5 Make sure media type and paper size settings match with loaded paper.Check6 Make sure that there are not any foreign objects in the rear tray.If the paper tears in the rear tray, see What to Do When Paper Is Jammed to remove it.If foreign object is in the rear tray, remove it according to the following procedure.1. Turn off the power of the printer and disconnect the power plug from the outlet.2. Open the feed slot cover.263