Canon Pixma G3060 Series Online Manual

Also see for Pixma G3060 Series: Getting started Getting started Getting started Online manual Online manual

RestrictionsWhen connecting another device while a device (such as a computer) is already connected to the printer,connect it using the same connection method as the connected device.If you connect using a different connection method, the connection to the device in use will be disabled.Connect via wireless router• Make sure your device and the wireless router are connected. For details on checking these settings,see the manual supplied with the wireless router or contact its manufacturer.As for a device already connected to the printer without using a wireless router, reconnect it via awireless router.• Configuration, router functions, setup procedures and security settings of wireless routers varydepending on the system environment. For details, see the manual for your wireless router or contactits manufacturer.• This printer does not support IEEE802.11ac, IEEE802.11a, or IEEE802.11n (5 GHz). Check if yourdevice supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.• If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a securityprotocol. Change the security protocol for your device to something other than WEP and TKIP orchange the setting to something other than "IEEE802.11n only."The connection between your device and the wireless router will be temporarily disabled while thesetting is changed. Do not proceed to the next screen of this guide until setup is complete.• For office use, consult your network administrator.• Note that if you connect to a network with no security protection, your personal information could bedisclosed to a third party.Wireless DirectImportant• If a device is connected to the Internet via a wireless router, and you then connect it to a printer inWireless Direct mode, the existing connection between the device and wireless router will bedisabled. In that case, the connection of the device may switch to a mobile data connectionautomatically depending on your device. When you connect to the Internet using a mobile dataconnection, charges may apply depending on your contract.When you connect a device and the printer using Wireless Direct, the connection informationwill be saved to Wi-Fi settings. The device may be connected to the printer automatically evenafter disconnecting it or connecting it to another wireless router.To prevent automatic connection to the printer in Wireless Direct mode, change the connectionmode after using the printer, or set not to connect automatically in the Wi-Fi settings of thedevice.For details on changing the settings of your device, see the manual supplied with the device orcontact its manufacturer.• If you connect a device and the printer using Wireless Direct, Internet connection may becomeunavailable depending on your environment. In that case, web services for the printer cannot be used.31