471345678910Before UseCommon CameraOperationsCamera BasicsOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideTv, Av, and MMode2 Auto ModeAdvanced GuideCoverStill ImagesChanging the Image Display Style after ShotsYou can change how long images are displayed and what information isdisplayed immediately after shooting.Changing the Image Display Period after Shots1 Access the [Review image aftershooting] screen.zz Press the <n> button, choose[Review image after shooting] on the[4] tab, and then press the <m> button(=24).2 Configure the setting.zz Press the <o><p> buttons or turnthe <7> dial to choose [Display Time].Press the <q><r> buttons to choose thedesired option.zz To restore the original setting, repeat thisprocess but choose [Quick].Quick Displays images only until you can shoot again.2 sec.,4 sec.,8 sec.Displays images for the specified time. Even while the shot is displayed,you can take another shot by pressing the shutter button halfway again.Hold Displays images until you press the shutter button halfway.Off No image display after shots.Still ImagesDeactivating the Red-Eye Reduction LampYou can deactivate the red-eye reduction lamp that lights up to reduce red-eye when the flash is used in low-light shots.1 Access the [Flash Settings]screen.zz Press the <n> button, choose [FlashSettings] on the [4] tab, and then pressthe <m> button (=24).2 Configure the setting.zz Choose [Red-Eye Lamp], and thenchoose [Off] (=25).zz To restore the original setting, repeat thisprocess but choose [On].
