951234578910Before UseCommon CameraOperationsCamera BasicsAuto ModeOther ShootingModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideTv, Av, and MMode6 Playback ModeAdvanced GuideCover• Protected images on a memory card will be erased if you format thecard (=136, 137).• Protected images cannot be erased using the camera’s erasure function. Toerase them this way, first cancel protection.Choosing Images Individually1 Choose [Select].zz Following step 2 in “Using the Menu”(=94), choose [Select] and press the<m> button.2 Choose an image.zz Press the <q><r> buttons or turn the<7> dial to choose an image, and thenpress the <m> button. [ ] is displayed.zz To cancel selection, press the <m>button again. [ ] is no longer displayed.zz Repeat this process to specify otherimages.3 Protect the image.zz Press the <n> button. Aconfirmation message is displayed.zz Press the <q><r> buttons or turn the<7> dial to choose [OK], and then pressthe <m> button.• Images will not be protected if you switch to Shooting mode or turnthe camera off before finishing the setup process in step 3.Selecting a Range1 Choose [Select Range].zz Following step 2 in “Using the Menu”(=94), choose [Select Range] andpress the <m> button.2 Choose a starting image.zz Press the <m> button.zz Press the <q><r> buttons or turn the<7> dial to choose an image, and thenpress the <m> button.
