142 Shooting / Replaying with a TV MonitorA video-compatible television connected via the supplied AV cable AVC-DC100 canbe used to view images as you shoot or replay them.1 Turn off the camera (p. 27, 29).2 Attach AV Cable AVC-DC100 to theterminal on the camera.3 Plug the other ends of the AV cable tothe video in and audio in jacks on the TV.4 Turn on the TV and switch it to Video mode.5 Turn on the camera in Shooting mode or Replaying mode(p. 27).• The image will appear on the TV. Shoot or replay images as usual.• If the images are not appearing on the TV when shooting, press thebutton.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• No image will appear on the LCD monitor when the camera is connected to a TVmonitor.• The video output signal can be switched (NTSC or PAL) to accommodate differentregional standards (p. 138). The default setting will vary between regions.NTSC: Japan, U.S.A., Canada, Taiwan, etc.PAL: Europe, Asia (excluding Taiwan), Oceania, etc.If an incorrect video system is set, the output image will not display properly.• You can plug the AV cable into either the left or right input jack on the TV. Pleaseconsult the TV’s manual for details.• A TV monitor cannot be used in mode.Shooting / Replaying with a TV MonitorTo theVideo In JackTo theAudio In JackYellowPlugBlackPlug
