30 Basic FunctionsSwitching the LCD Monitor Display ModeThe LCD monitor can be used to confirm an image during shooting, to replayrecorded images or to adjust menu settings. Pressing the button switchesthe LCD monitor display mode.2 Shooting Mode• Pressing the button cycles the LCD monitor to the next mode each timethe button is pressed.On (No Information) ➝ On (Information View) ➝ Off○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• The on/off setting of the LCD monitor display mode is memorized when thecamera is turned off. When the camera is turned on again it assumes the lastmode. However, when the LCD monitor is turned on and the “Change the BatteryPack” message appears, the LCD monitor may not automatically turn on the nexttime the camera is started.• Changing the shooting mode will cause the LCD monitor to display relevantinformation for about six seconds when it is turned on regardless of whether theinformation view mode is on or off.• Setting the mode dial to , or turns on the LCD monitor regardless ofwhether it is set to on or off.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• The camera shake warning icon will appear at the center of the LCD monitor inlow light conditions while the camera is preparing to shoot. When this iconappears, use the flash or fix the camera to a tripod to shoot.2 Replaying Mode• The LCD monitor turns on when you turn on the camera in Replaying mode(p. 27).• Pressing the button cycles the information view mode each time thebutton is pressed.Single Replay: Simple Display Detailed Display No DisplayIndex Replay: Simple Display No Display
