85Shooting - Selecting Particular EffectsChanging the ISO SpeedRaise the ISO speed when shooting in dark places or when you want to shoot witha faster shutter speed. You can choose from the following speeds: Auto, 50, 100,200 and 400.1 Press the / / button.2 Select * (ISO Speed) using C or D onthe multicontroller.* The current setting is displayed.3 Select the desired setting using B or Aon the multicontroller.You can shoot the image right after selectingsettings by pressing the shutter button. Thisscreen will appear again, once the image is shot.4 Press the / / button.5 Shoot the image.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• Higher ISO speeds increase the image noise. To take clean images, use as low anISO speed as possible.• Although the AUTO setting selects the optimal speed, it will automatically raisethe speed when the shooting conditions limits are reached. It will also raise thespeed when the light from the flash is insufficient to illuminate the subject matter.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Some settings are not available with certain Shooting modes. Please refer toFunctions Available in Each Shooting Mode (p. 180)
