104You can manually set the shutter speed and aperture to shoot images withthe exposure you want. D stands for “Manual”.Set the mode dial to D.Choose a setting.z Press the o button to choose the shutterspeed or aperture value.z Turn the 5 dial to set a value.X The set exposure level appears on theindicator. You can check the differenceagainst the standard exposure level.X When the difference is more than ±2 stops,the set exposure level appears in orange.When you press the shutter buttonhalfway, “–2” or “+2” appears in orange.Setting the Shutter Speed and ApertureValueShutter SpeedAperture ValueStandardExposure LevelExposure LevelIndicatorExposure Level• The standard exposure is calculated according to the metering methodchosen (p. 95).• If you use the zoom or change the composition after making settings, theexposure level may change.• Depending on the shutter speed and aperture value set, the screenbrightness may change. If the flash is raised and set to h, the screenbrightness will not change.• If you press the o button while holding down the shutter button halfway,the shutter speed or aperture value (whichever is not chosen in Step 2),will automatically adjust to obtain the correct exposure (the correctexposure may not be obtained depending on the settings).COPY