List of Messages That Appear on the Screen190• Movies cannot be magnified (p. 125), played back in Smart Shuffle (p. 127), edited(pp. 139 – 143), added to a print list (p. 152), or registered to the start-up screen(p. 160).Invalid selection range• When choosing the selection range (pp. 130, 133, 137, 155), you tried to choose astarting image that was after the last image or you tried to choose an ending image thatwas before the starting image.Exceeded selection limit• You chose more than 998 images in print settings. Choose 998 or less images (p. 152).• Print settings could not be saved correctly. Reduce the number of selected images andtry again (p. 152).• You chose 501 or more images in Protect (p. 128), Erase (p. 132), Favorites (p. 134),My Category (p. 135) or Print Settings (p. 152).Communication error• Images could not be transferred to the computer or printed due to the large amount ofimages (approx. 1000) stored on the memory card. Use a commercially available USBcard reader to transfer the images. Insert the memory card into the printer’s card slot toprint.Naming error!• The folder or image could not be created because there is an image with the same filename as the folder or image that the camera is attempting to create, or the highestpossible file number has already been reached. In the 3 menu, change [FileNumbering] to [Auto Reset] (p. 161) or format the memory card (p. 23).Lens Error• This error can occur if you hold the lens while it is in motion or when using it in a locationwith excessive dust or sand in the air.• If this error message continues to appear, contact a Canon Customer Support HelpDesk as there may be a problem with the lens.A camera error was detected (Error number)• If an error code appears directly after taking a picture, the shot may not have beenrecorded. Check the image in Playback mode.• If this error code reappears, note the Error number (Exx) and contact a CanonCustomer Support Help Desk as there may be a problem with the camera.File Error• Photos from other cameras or images that have been altered using computer softwaremay not be printable.Print error• Check the paper size settings. If this message appears when the settings are correct,turn the printer off and back on, then make the settings again.Ink absorber full• Contact a Canon Customer Support Help Desk for an ink absorber replacement.COPY