120Before UseBasic GuideAdvanced GuideSetting MenuCamera BasicsAuto Mode / Hybrid AutoModeOther Shooting ModesP ModePlayback ModeWi-Fi FunctionsAccessoriesAppendixIndexPower-Saving AdjustmentAdjust the timing of automatic camera and screen deactivation (AutoPower Down and Display Off, respectively) as needed (= 25).● Choose [Power Saving], and then pressthe [ ] button.● After choosing an item, press the [ ][ ]buttons to adjust it as needed.● To conserve battery power, you should normally choose [On] for[Auto Power Down] and [1 min.] or less for [Display Off].● The [Display Off] setting is applied even if you set [Auto PowerDown] to [Off].● These power-saving functions are not available when you haveset Eco mode (= 120) to [On].Lens Retraction TimingThe lens is normally retracted for safety about one minute after you pressthe [ ] button in Shooting mode (= 24). To have the lens retractedimmediately after you press the [ ] button, set the retraction timing to[0 sec.].● Choose [Lens Retraction], and thenchoose [0 sec.].Using Eco ModeThis function allows you to conserve battery power in Shooting mode.When the camera is not in use, the screen quickly darkens to reducebattery consumption.1 Configure the setting.● Choose [Eco Mode], and then choose [On].● [ ] is now shown on the shootingscreen (= 146).● The screen darkens when the camerais not used for approximately twoseconds; approximately ten secondsafter darkening, the screen turns off.The camera turns off after approximatelythree minutes of inactivity.2 Shoot.● To activate the screen and prepare forshooting when the screen is off but thelens is still out, press the shutter buttonhalfway.
