129Before UseBasic GuideAdvanced GuideAccessoriesCamera BasicsAuto Mode / Hybrid AutoModeOther Shooting ModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAppendixIndex● When the camera and TV are connected, you can also shootwhile previewing shots on the larger screen of the TV. To shoot,follow the same steps as when using the camera screen.However, AF-Point Zoom (= 43) is not available.Powering the Camera with Household PowerStill Images MoviesPowering the camera with AC Adapter Kit ACK-DC40 (sold separately)eliminates the need to monitor the remaining battery level.1 Make sure the camera is off.2 Insert the coupler.● Follow step 1 in “Inserting the BatteryPack and Memory Card” (= 18) toopen the cover.● Holding the coupler with the terminals (1)facing as shown, insert the coupler justas you would a battery pack (followingstep 2 in “Inserting the Battery Pack andMemory Card” (= 18)).● Follow step 4 in “Inserting the BatteryPack and Memory Card” (= 18) toclose the cover.3 Connect the adapter to the coupler.● Open the cover and insert the adapterplug fully into the coupler.(1)Playback on a Standard-Definition TVStill Images MoviesConnecting the camera to a TV with the AV Cable AVC-DC400 (soldseparately) enables you to view your shots on the larger screen of the TVas you control the camera.1 Make sure the camera and TV areoff.2 Connect the camera to the TV.● On the TV, insert the cable plugs fully intothe video inputs as shown.● On the camera, open the terminal coverand insert the cable plug fully into thecamera terminal.3 Display images.● Follow steps 3 – 4 in “Playback on aHigh-Definition TV” (= 128) to displayimages.● Correct display is not possible unless the camera video outputformat (NTSC or PAL) matches the TV format. To change thevideo output format, press the [ ] button and choose[Video System] on the [ ] tab.
