37Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / Hybrid AutoModeOther Shooting ModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndex● If the person whose face is detected moves toward the edge ofthe screen, the camera zooms out to keep the person in view.● The zoom factor cannot be changed after you press the shutterbutton all the way down in self-timer mode (= 37).● In order to display the subject on the screen consistently whenthe subject is moving or in certain shooting conditions, the facemay not be displayed at a constant size.● When no face is detected, the camera zooms to a certain leveland stops zooming until a face is detected.Using the Self-TimerStill Images MoviesWith the self-timer, you can include yourself in group photos or othertimed shots. The camera will shoot about 10 seconds after you press theshutter button.1 Configure the setting.● Press the [ ] button, choose [ ] in themenu, and then choose [ ] (= 26).● Once the setting is complete, [ ] isdisplayed.1 Enter Auto Zoom mode.● Press the [ ] button.● [ ] is displayed.● A white frame is displayed around thedetected face, and the camera zooms inand out automatically to keep the subjecton the screen.● If more than one face is detected, awhite frame is displayed around themain subject’s face and gray framesare displayed around up to two morefaces. The camera zooms in and outautomatically to keep the subjects on thescreen.2 Shoot.● Even after your shot, the frame is stilldisplayed and the camera continues tozoom automatically.● Press the [ ] button again. [ ] isdisplayed and Auto Zoom is disabled.● Faces may not be detected at some zoom factors, or if thesubject’s head is tilted or facing the camera indirectly.● You can also zoom in or out with the zoom lever, but the originalzoom factor will be restored in a few seconds after you releasethe lever.● Auto Zoom is disabled in the following situations.- When changing shooting modes- When the [ ] button, movie button, or [ ] are pressed- When [ ] is pressed while the flash is raised
