133You can cut out a portion of a recorded image and save it as a new image file.Choose [Trimming].● Press the n button, choose the 1tab and [Trimming], then press the mbutton.Choose an image.● Press the qr buttons or turn the  dialto choose the image and press the mbutton.Adjust the trimming area.X A frame will appear around the portion ofthe image to be trimmed.X The original image will display in the upperleft and the trimmed image will display inthe lower right.● If you move the zoom lever to the left orright, you can change the frame size.● If you press the opqr buttons, you canmove the frame.● If you press the l button, you canchange the frame size.● In an image with detected faces, grayframes appear around the faces located inthe upper left image. The frames can beused for trimming. You can switch betweenframes by turning the  dial.● After pressing the m button, press theqr buttons or turn the  dial to choose[OK], then press the m button again.Save as a new image and display.● Perform Steps 4 and 5 on p. 132.TrimmingRecorded pixelsafter trimmingTrimming AreaTrimming Area DisplayCOPY
