Shooting with Slow Synchro92Set the exposure compensationamount.● Press the l button.● Press the qr buttons or turn the  dialto adjust the setting.● From the exposure set by the camera, youcan adjust the amount of compensation±2 stops in 1/3-stop increments. Ifexposure compensation (p. 69) is alreadybeing used, settings are made with thecompensated value as the base.You can make the main subject, such as people, appear bright by having thecamera provide the appropriate illumination with the flash. At the same time,you can use a slow shutter speed to brighten the background that the lightfrom the flash cannot reach.Raise the flash (p. 69).Choose ….● After pressing the h button, press the qrbuttons or turn the  dial to choose …,then press the m button again.X Once set, … will appear on the screen.Shoot.● Even if the flash fires, ensure that thesubject does not move until the shuttersound ends.• If the flash fires, a single, normal image will be shot.• Continuous shooting (p. 75) cannot be used in this mode.Shooting with Slow SynchroAttach the camera to a tripod to prevent the camera from moving andblurring the image. It is recommended to set the [IS Mode] to [Off] whenshooting with a tripod (p. 149).COPY
