43Before UseBasic GuideAdvanced Guide1 Camera Basics2 Auto Mode /Hybrid Auto Mode3 Other Shooting Modes4 P Mode6 Playback Mode5 Tv, Av, and M Mode7 Setting Menu8 Accessories9 AppendixIndexChanging Movie Image QualityStill Images Movies3 image quality settings are available. For guidelines on the maximummovie length at each level of image quality that will fit on a memory card,see “Recording Time per Memory Card” (= 135).● Press the [ ] button, choose [ ] in themenu, and choose the desired option(= 26).● The option you configured is nowdisplayed.● To restore the original setting, repeat thisprocess but choose [ ].ImageQuality Resolution Frame Rate Details1920 x 1080 30 fps For shooting in Full HD1280 x 720 30 fps For shooting in HD640 x 480 30 fps For shooting in standarddefinition● In [ ] and [ ] modes, black bars displayed on the top andbottom edges of the screen indicate image areas not recorded.Red-Eye CorrectionStill Images MoviesRed-eye that occurs in flash photography can be automatically correctedas follows.1 Access the [Flash Settings] screen.● Press the [ ] button, choose [FlashSettings] on the [ ] tab, and then pressthe [ ] button (= 27).2 Configure the setting.● Choose [Red-Eye Corr.], and thenchoose [On] (= 27).● Once the setting is complete, [ ] isdisplayed.● To restore the original setting, repeat thisprocess but choose [Off].● Red-eye correction may be applied to image areas other thaneyes (if the camera misinterprets red eye makeup as red pupils,for example).● You can also correct existing images (= 91).● You can also access the screen in step 2 when the flash is up bypressing the [ ] button and immediately pressing the [ ]button.
