Canon REALiS WUX10 Mark II D User Manual

Also see for REALIS WUX10 MARK II D: Brochure Brochure Product guide User manual Brochure & specs

Contents

C3CHAPTER 2 • Routine OperationUsing the Crojector Group List214About Projector Groups2.4.1Projectors connected to the network can be managed in groups using this software.Projector groups vary as described below:Type DescriptionTypical group Typical group that automatically classifies managed projectorsdepending on its status. Typical group includes "All projectors","Power on", "Power off", "Disconnect", "Warning", and "Replacingthe lamp". You cannot change or delete the settings of this Typicalgroup.For projectors classified into "Warning" and "Replacing the lamp"types, confirm its status and take appropriate measures. Forprocedures on handling malfunctions and replacing lamps, see theinstruction manual that came with the projector.Status group Group that automatically classifies all managed projectorsdepending on its status. Status groups can be created by specifyingthe location or status. You can change or delete the parameters ofthis Status group.(e.g. "Clean Filter Group", "Main Building First Floor", etc.)User group Group that classifies all managed projectors. It will be a User groupif only the name of group is registered and the projector's status isnot specified. You can change the name or delete this User group.User groups are shown as a sub-menu of either [Move] or [Copy]from the [Projector] menu, and any projectors can be added tothese groups.(e.g. "Sales Management Group", "Administration ManagementGroup", etc.)Creating a Projector Group2.4.2Create a new projector group with the following procedures.Select [New] from the [Group] menu.1[Add new projector group] window will display.