Canon REALiS WUX10 Mark II D User Manual

Also see for REALIS WUX10 MARK II D: Brochure Brochure Product guide User manual Brochure & specs

Contents

C4CHAPTER 2 • Routine OperationEnter a projector group name, and place a check mark beside necessary2 projector parameter categories and enter its conditions for classification.It will be a "Status group" if more than one condition is specified, and a "User group" ifnone is specified.Category DescriptionProjector groupnameEnter a name within 40 one-byte characters.Product name E n ter a product n a m e o f the pro jecto r usi ng one- by tealphanumerical characters.Projector name Enter any name of a projector in two-byte or one-byte characters.Location Enter a location of the projector in two-byte or one-byte charactersStatus Select a status of the projector from "Disconnected", "Power off",or "Power on".Warning Select a warning status of the projector from "Yes" or "No".Lamp Select a status of the lamp from "Normal", "Obtain a new lamp","Replace with the new lamp", "Obtain or replace with the newlamp", or "Warning".Lamp Time(converted)Select from "over" or "less than", and enter a number from 0 to99999 for lamp usage time.Filter Select a status of the filter from "Normal", "Cleaning the air filter","Replacing the air filter" or "Cleaning or replacing the air filter".Air filter time Select from "over" or "less than" and enter a number from 0 to99999 for air filter usage time.Click [OK] when you have completed entering the conditions.3 Projector group is now added in the Projector group list.