2.4 Troubleshooting Error Indications1) Error indication when a user-resolvable error occursThe indicator lights in green, then blinks in orange. This repeats.Check the number of blinks and proceed to correct the error.2) Error indication when an error not resolvable by the user occursThe indicator toggles between orange and green (orange/green toggle blinking). Thisrepeats.Check the number of toggled blinks and proceed to correct the error.*1: The error code is displayed by the computer. With the iMac and Power MacintoshG3, a "D" or "M" is appended to the beginning of the error code.*2: The waste-ink warning can be canceled by pressing theRESUME button.*3: Press theRESUME button to resume operation.Table 2-1 ERROR INDICATIONSIndicator Error Status Probable Cause and Faulty PartsBlink Count Code* 1User-Recoverable Errors1. No paper was loaded.2. During feeding, the paper did not reach thepaper-end sensor.3. During feeding, the paper's bottom edgemissed the paper-end sensor.4. The ASF sensor did not return to its initialposition and the paper-end sensor concludedthat there was no paper. (ASF motor may beout of sync.)Paper feed section, sheet feeder unit, paper-endsensor, control board1. The paper-end sensor still detects the presenceof paper even after 23 inches of paper ejectionoperation.2. The ASF sensor did not return to its initialposition and the paper-end sensor concludedthat there was no paper. (Out of sync.)3. During paper feeding abnormal timing causedthe paper-end sensor to still detect paper.Paper feed section, paper-end sensor, controlboardThe respective ink tank has run out of ink (in thetank and sponge).Ink tankOrange2 blinksOrange3 blinksOrange4 blinks--- Paper feed error--- Paper jam error--- No-ink error* 3Part 2: Troubleshooting S6002-10