Canon SELPHY ES1 User Manual

Also see for 0324B001 - SELPHY ES1 Photo Printer: Software guide Software guide Software guide Software guide

Contents

Canon SELPHY ES1 User Manual Manual pdf 43 page image

41Connecting to a Non-Canon Digital Camera for PrintingSince the SELPHY ES1 printers support the direct print PictBridge* standard, you canconnect PictBridge compliant non-Canon digital cameras to easily print high qualityphotos.*PictBridge: PictBridge is an industry standard for direct printing that allows you to print imageswithout using a computer by directly connecting a digital camera or digital camcorder(hereafter “camera”) to a printer, regardless of their brands and models. Before Using the PrinterPlease read carefully the user guide that came with your camera and make sure that: Connecting the CameraConnect the retractable USB cable to the camera’s terminal. If the connector on thecamera side does not match up, insert one end of the USB cable included with yourcamera in the printer’s direct print port or USB port (p. 17) and insert the other end in thecamera’s terminal. For details, refer to the camera’s user guide.z The printer’s power button blinks green several times once the printer and camera are correctlyconnected. The power button lights steadily green once it is ready to print.z If a problem occurs during a connection or during printing, the printer’s power button lights orblinks red. If this happens, the error message that appears on the camera’s LCD monitor maydiffer according to your camera model.Printing speed may differ according to your camera model and the image’s number ofrecorded pixels. (The value written on page 73 is a printing speed obtained when printingwith a Canon camera.) Disconnect the cameraBefore you disconnect the camera from the printer, turn off the printer by holding downthe power button until the green indicator goes out.z The camera is PictBridge compliant.z You are using the retractable USB cable or the USB cable for the camera/computer connectionto connect the printer to the camera.z The camera’s communication settings are configured correctly.*z You set the print settings with the camera.** For details, refer to the camera’s user guide.