Canon SELPHY ES1 User Manual

Also see for 0324B001 - SELPHY ES1 Photo Printer: Software guide Software guide Software guide Software guide

Contents

Canon SELPHY ES1 User Manual Manual pdf 72 page image

70Error MessagesThe power button of the printer blinks or lights red and a message is displayed on theLCD monitor if any error occurs during printing. If a problem occurs while the printer isconnected to the camera, the camera's LCD monitor may display an error message. Power button LCD monitorButton State RemedyBlinks red z An error (e.g. paper jam) that prevents printing from restarting hasoccurred. Turn the printer off then back on again, and try printingagain.Blinks orange z Battery pack depleted. Change it with a fully charged battery pack orrecharge the battery pack. You can also use the printer’s compactpower adapter.Lights red z Check the error message on the LCD monitor.Message RemedyNo paper/ink z Check that the cartridge is correctly installed.z Make sure that the cartridge contains paper/ink.z If paper is not feeding correctly, remove the cartridge, and manuallyremove any paper remaining in the printer.Paper jam z Press the PRINT/STOP button to eject the paper. If the paper is notejected, turn the power off and turn it on again. If the printer fails toeject the paper, contact a Canon Customer Support center forassistance.Ink Error z Remove the cartridge from the printer, take up the slack in the inksheet, and then reload the cartridge. If the cartridge is stuck in theprinter, contact a Canon Customer Support center for assistance.Recharge theprinter batteryz Change it with a fully charged battery pack or recharge the batterypack. You can also use the printer’s compact power adapter.Cannot print! z You tried to print the following images:-An image taken with a different camera or recorded in a differenttype-An image altered by a computer-An image with a data size that is too big-An image that is corruptedCheck whether the image’s size matches the camera’s pixel capacity.If the size is not appropriate, resize the image and convert it asnecessary to a JPEG image that the camera can display. Limit thesize of image files to less than 8000 x 6000 pixels.