Canon SELPHY ES40 User Manual
Also see for SELPHY ES40: Brochure
                                                                                  | |
Contents
| 
Storing the Printed PhotosWhen both sides of a print have perforations, you can remove the edgesby bending them.Use an oil-based pen to write on prints.To prevent discoloration, be sure to store the printed photos so that theywill be protected from humidity, dust, direct sunlight, and temperatures ofover 40°C (104°F).Avoid actions that may result in color change, color fading or colorbleeding, such as the following: Sticking any type of adhesive tape on a print surface, allowing printsurfaces to come into contact with vinyl or plastic, applying alcohol or other volatile solvents to aprint surface, leaving print surfaces tightly pressed against other surfaces or objects for prolongedperiods.If you wish to mount prints in an album, choose an album with photo covers made of nylon,polypropylene or cellophane.Color may change over time or depending on storage conditions. Canon assumes no liability forcolor changes.Cleaning Up After PrintingAfter you finish printing, follow the steps below to clean up and store SELPHY.Turn off the power (p. 9), remove the memory card, and close the card slot cover.Removed the printed photos from the print output receptacle and close the print output receptaclecover.Unplug the power cord from the power outlet and disconnect the other end of the cord fromSELPHY.Remove the cartridge from SELPHY, and insert the cleaner unit.Return the cartridge to its original package and store in a dark place where it will be protected fromdust.If dust enters the printer or dust sticks to the cartridge, print quality may deteriorate.Any unused Easy Photo Packs should be stored unopened in a dark place.COPY |
Related manuals for Canon SELPHY ES40
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine