Canon SELPHY ES40 User Manual

Also see for SELPHY ES40: Brochure

Contents

Canon SELPHY ES40 User Manual Manual pdf 7 page image

Do not stick any part of your hand into the printer interior.Be sure to place SELPHY safely so as to avoid tripping over the power cord.This could lead to injury or damage the printer.Do not use the power cord beyond its rated capacity or voltage, or leave the plug partiallyinserted into the power outlet. Do not use if the power cord or plug has been damaged.Do not allow metallic pins to touch or allow dust to collect on the power plug.Do not use the power cord for any other equipment except this printer.This could result in electrical shock or fire.Avoid using, placing or storing the printer in the following places.-Places subject to strong sunlight.-Places subject to temperatures above 40° C (104° F).-Humid or dusty areas.-Places subject to strong vibrations.Electrical shock or heating could result in burn, injury or fire. Heat may cause deformation of theprinter’s casing.CAUTIONUnplug the printer when not in use.Not doing so could result in electrical shock or fire.CAUTIONGetting StartedThis section will prepare you to start printing images. The postcard size cartridge (sold separately)(p. 3) will be used as an example in this section. However, you can print with other cartridges using thesame steps.1 Prepare the cartridge.If there is an orange stopper attached to thecartridge, remove it as shown in the illustration.Ink sheetCheck that the ink sheet is taut with no slack.If the ink sheet is slack, insert the cleaner unit(p. 3) as shown in the illustration and turn itslowly to take up the slack. If you overwind theink sheet, it may not be possible to use all thepaper for printing and the ink sheet may tear.Clipprotective paperCheck that the protective paper is correctlyloaded in the cartridge. If the protective sheethas come out from under the clips, use yourfinger to push it back under the clips.Inserting the Cartridge into SELPHYCOPY