Canon SELPHY ES40 User Manual

Also see for SELPHY ES40: Brochure

Contents

Canon SELPHY ES40 User Manual Manual pdf 57 page image

System RequirementsWindows MacintoshOSWindows Vista (including Service Pack 1,Service Pack 2)Windows XP Service Pack 2,Service Pack 3Mac OS X v10.4 – v10.5Configuration The above OS should be pre-installed on computers with built-in USB ports.CPU Pentium 1.3 GHz or higher PowerPC G4/G5 or Intel ProcessorRAM Windows Vista: 1 GB or moreWindows XP: 512 MB or more 512 MB or moreInterface USBFree Hard DiskSpace 120 MB or more* 140 MB or moreDisplay 1,024 × 768 pixels or more 1,024 × 768 pixels or moreYou need a CD-ROM drive to install the software.* For Windows XP, Microsoft .NET Framework 2.0 (max. 280MB) must be installed.SELPHY may not operate correctly if it is connected to a computer via a USB hub.SELPHY may not function properly if other USB devices (with the exception of a USB mouseor USB keyboard) are used at the same time. Disconnect any other USB devices from yourcomputer and then reconnect SELPHY.Do not put your computer into the standby mode (or sleep mode) while SELPHY is connected tothe computer’s USB port. If you accidentally do so, awaken the computer from the standby modewithout disconnecting the USB cable.For details on how to awaken the computer refer to the user guide provided with your computer.COPY