Note• You cannot use the same printer name as that already used for other LAN connected devices.• You cannot use a hyphen for the initial or last character of the printer name.• TCP/IP settingsPerforms IPv4 or IPv6 setting.• WSD settingSetting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows8, Windows 7, and Windows Vista).◦ Enable/disable WSDSelects whether WSD is enabled or disabled.Note• When this setting is enabled, the printer icon is displayed on the Network Explorer inWindows 8.1, Windows 8, Windows 7, and Windows Vista.◦ Optimize inbound WSDSelecting Enable allows you to receive the WSD printing data faster.◦ WSD scan from this deviceSelecting Enable allows you to transfer the scanned data to the computer using WSD.◦ Timeout settingSpecifies the timeout length.• Bonjour settingsSetting items for LAN using Bonjour for Mac OS.◦ Enable/disable BonjourSelecting Enable allows you to use Bonjour to perform the network settings.◦ Service nameSpecifies the Bonjour service name. You can use up to 48 characters for the name.Note• You cannot use the same service name as that already used for other LAN connecteddevices.• LPR protocol settingEnables/disables the LPR setting.• RAW protocolEnables/disables RAW printing.• LLMNREnables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printerto detect printer's IP address from the printer name without a DNS server.• PictBridge communication162
