To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees leftwhen orientation is [Landscape] check box.Rotate 180 degreesPrints the document by rotating it 180 degrees against the paper feed direction.The width of print area and the amount of extension that are configured in other application software willbe reversed vertically and horizontally.Printer Paper SizeSelects the size of paper actually loaded into the printer.The default setting is Same as Page Size to perform normal-sized printing.You can select a printer paper size when you select Fit-to-Page, Scaled, Page Layout, Tiling/Poster,or Booklet for Page Layout.If you select a paper size that is smaller than the Page Size, the document size will be reduced. If youselect a paper size that is larger, the document size will be enlarged.Also if you select Custom..., the Custom Paper Size dialog box opens and allows you to specify anyvertical and horizontal dimensions for the paper size.Page LayoutSelects the size of the document you want to print and the type of printing.Normal-sizeThis is the normal printing method. Select this when you do not specify any page layout.Automatically reduce large document that the printer cannot outputIf the printer cannot print the paper size of a document, the printer can automatically reducethe size when it prints the document.Check this check box to reduce the size when printing the document.BorderlessChooses whether you are printing on a full page without any page margins or printing with pagemargins.In borderless printing, originals are enlarged to extend slightly off the paper. Thus, printing can beperformed without any margins (border).Use Amount of Extension to adjust how much of the document extends off the paper duringborderless printing.Amount of ExtensionAdjusts how much of the document extends off the paper during borderless printing.Moving the slider to the right increases the amount of extension and allows you to performborderless printing with no problems.Moving the slider to the left reduces the amount of extension and expands the range of thedocument to print.Fit-to-PageThis function enables you to automatically enlarge or reduce documents to fit to the paper sizeloaded in the printer without changing the paper size you specified in your application software.ScaledDocuments can be enlarged or reduced to be printed.Specify the size in Printer Paper Size, or enter the scaling ratio in the Scaling box.ScalingSpecifies an enlargement or reduction ratio for the document you want to print.254