View Restriction Setting Tool6-136 Admin ToolsDisplay Screens of View Restriction Setting Tool1 Image Display AreaThe image currently captured by the camera is shown.Pan, tilt, and zoom operations are the same as in theVB-M40 Viewer. For details, see “How to Operate theViewer” (P. 7-5).2 [Switch Screen Size] buttonEach time this button is clicked, the screen size of theimage display area switches between “320 x 240” and“640 x 480”.3 [Switch Mouse Operation] buttonClick the button to switch to . In this mode, move themouse pointer to the image display area and left-clickto operate the pan and tilt. Click the button again toreturn to .4 [Obtain/release Camera Control] buttonThis button is used to obtain/release the cameracontrol privileges. For details, see “Obtaining CameraControl Privileges” (P. 7-7).5 [Focus]Focus can be operated if control privileges have beenobtained. Focus operations are the same as in the AdminViewer. For details, see “Setting the Focus” (P. 7-14).6 [Smart Shade Control]Smart shade control can be operated if controlprivileges have been obtained. Smart shade controloperations are the same as in the Admin Viewer. Fordetails, see “Setting the Smart Shade Control”(P. 7-14).7 [Panorama Screen]The panorama image registered in the camera isshown. View restriction preview frames, representingthe view restriction setting values, are also shown. Youcan drag the frames to change their shapes, with thenew settings being reflected in View RestrictionSettings.• View restriction preview frame7-1 Pan/tilt preview frame (red frame)Range of field of view defined bytop/ bottom/left/right edges7-2 Wide-angle preview frame (green frame)Wide-angle restriction setting (restriction ofcapture frame)7-3 Telephoto preview frame (yellow frame)Telephoto restriction setting (restriction ofmaximum zoom ratio)8 [Digital Zoom]The current digital zoom usage status of the camera isshown in real time.9 [Image Stabilizer]The current image stabilizer usage status of thecamera is shown in real time.Aq [Apply the view restriction]To use view restrictions, select this checkbox.Aa View restriction setting entry boxes and [Get value]You can enter a value in each view restriction settingentry box to change the applicable setting. You canload the values for the current camera angle to the viewrestriction settings by clicking [Get value].
