6-188 [Preset] tab, [Preset Tour] tabSwitch between the preset setting tab and preset toursetting tab.9 [Preset/Home Position] selection boxSelect the preset (from 1 to 20) or [home position] youwant to set.Aq [Quick Registration]Load the current camera position, and register them aspreset settings.Aa [Preset Name]You can enter a preset name of up to 64 characters.You can set a name in alphanumeric characters. Besure to enter a single-byte alphanumeric preset name.When the [Home Position] is selected in 9, the presetname function is grayed out.In a [Preset Name], ASCII characters (spaces orprintable characters) can be used.As [Detailed Settings]Show the detailed settings.As-1 [Show in viewers] checkboxSelect this checkbox to use presets in the viewer.When the [Home Position] is selected in 9, thisfunction is grayed out.As-2 Camera ParameterEnter the center angle of the desired angle in[Pan] and [Tilt]. In [Zoom], enter the view angle.• Camera Angle[Pan] ..... Set the pan position of the camera.[Tilt] ....... Set the tilt position of the camera.[Zoom] .. Set the viewing angle of the camera.• [BLC] (Back Light Compensation)Select [OFF] or [ON] for the BLC setting of thecamera.• [Focus Mode]Select [Auto], [Manual], or [Fixed at infinity] forthe focus mode of the camera. (P. 7-14)• [Smart Shade Control]Select [OFF] or a level from [1] (weak) to [7](strong) for the smart shade control setting of thecamera.• [White Balance]Set the white balance of the camera to [Auto] oraccording to the light source of the condition inwhich it is used. For details on light sources, seeP. 5-10.• [R Gain], [B Gain]If white balance is set to [Manual], set therespective gains to a value between 0 and 1023.Ad [Get camera info]Load the current camera angle, the 5 [Focus]settings, or 6 [Smart Shade Control] settings of theimage display area, and reflect them in the panoramascreen or camera parameter settings.Af [Preview settings]Use the camera parameter values that are being editedto adjust the camera angle, 5 [Focus], or 6 [SmartShade Control], and preview them in the image displayarea.Ag [Clear settings]Delete the settings for the preset selected.Ah [Restore settings]Clear the settings you have specified on the screen ofthe tool and restore the settings saved in the camera.Aj [Save settings]Save the edited preset settings in the camera.If presets have been set, be sure to save the settingsby clicking [Save settings].
