Preparing the Camcorder22• If you wear glasses, you may find the viewfinder easier touse if you flip back the outer edge of the eye cup towardthe camcorder body.NOTES• Make sure you keep the eye cup attached when using the camcorder.• For details about how to take care of the viewfinder, refer to Handling Precautions (A 167),Cleaning (A 171).Adjusting the OLED ScreenOpen the OLED panel 90 degrees.• You can rotate the panel 90 degrees downward.• You can rotate the panel 180 degrees toward the lens. Rotating the OLED panel 180 degrees canbe useful in the following cases:- To allow the subject to monitor the OLED screen while you use the viewfinder.- To allow the camcorder to be operated with the wireless controller from the front.NOTES• When you rotate the OLED panel, video noise may appear on the screen momentarily. This is not amalfunction.• You can adjust the brightness of the OLED screen and viewfinder with the q > [OLED/VFBrightness] setting or by holding D pressed down for more than 2 seconds. Pressing D willchange the brightness between bright and normal.• Adjusting the brightness or using the q > [ View Assistance] setting does not affect thebrightness of recordings.• Using a brighter setting will shorten the effective usage time of the battery pack.• For details about how to take care of the touch screen, refer to Handling Precautions (A 167),Cleaning (A 171).180°90° Subject can monitor the OLED screen(you can use the viewfinder at the same time)180°
