Wi-Fi Functions 141In step 2, if you selected [OPEN NONE], this step is not necessary.4 Touch [Automatic] or [Manual] to select how to obtain the IPaddress.If you selected [Automatic], proceed to step 11.5 For both the IP address and subnet mask areas, touch [0.0.0.0]and then touch [Í]/[Î] to change the value.Touch and next field and change the value, as necessary.6 Touch [OK] and then touch [Next].7 In the default gateway area, touch [0.0.0.0] and then touch [Í]/[Î] to change the value.Touch and next field and change the value, as necessary.8 Touch [OK] and then touch [Next].9 For both the primary and secondary DNS server areas, touch[0.0.0.0] and then touch [Í]/[Î] to change the value.Touch and next field and change the value, as necessary.10 Touch [OK] and then touch [Next].11 Touch [OK].• After the connection is established, continue using the function youwere previously using. For details, refer to the procedure inViewingand Changing Wi-Fi Settings (A 142) orSharing Your RecordingsUsing Web Services (A 133), as necessary.NOTES• The Wi-Fi functions available and the setup method will vary dependingon the specifications and characteristics of the Wi-Fi network you wantto use.Viewing and Changing Wi-Fi SettingsWhen the camcorder is connected to an access point or to a Wi-Fi-enabled device, you can view the Wi-Fi connection settings and evenchange them, if necessary.Operating modes:SCNCOPY
