76 Advanced ShootingOptions ( Default value)NOTES• If the degree of camcorder shake is too high, the image stabilizer maynot be able to fully compensate.• [ Dynamic] is available only when [Zoom Type] is set to[ Optical].• For surveying and following shots, when you pan the camcorder fromside to side or tilt it up and down, we recommend setting the IS modeto [ Dynamic] or [ Standard].Face Detection and TrackingThe camcorder automatically detects people’s faces and uses thisinformation to select the optimal settings for beautiful videos and pho-tos. You can use tracking to tell the camcorder to track and optimize[ Dynamic] Compensates for a higher degree of camcordershake, such as when shooting while walking, and is more effec-tive as the zoom approaches full wide angle.[ Standard] Compensates for a lower degree of camcordershake, such as when shooting while remaining stationary, and issuitable for shooting natural-looking scenes.[j Off] Use this setting when the camcorder is mounted on atripod.Powered ISYou can use Powered IS to make the image stabilization even morepowerful. Powered IS is most effective when you are stationary andzooming in on far subjects using high zoom ratios (the more youapproach the telephoto end). Holding the LCD panel with your lefthand will add to the stability of the shot.• Repeat, selecting [OFF], to turn off Powered IS.> [È Powered IS] > [ON] > [X]COPY
