13Installing and Removing the BatteryIntroductionThe remaining battery power is displayed when the camera is turned on.Number of images that can be transferred Approx. number of imagesUsing a fully charged LP-E6. The number of images that can be transferred is nearly thesame at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).When automatic transfer is performed during shooting of an image of approx. 6.1 MB underconditions based on the CIPA (Camera & Imaging Products Association) test standards.Fewer images can be transferred when transferring images over a wireless LAN.Fewer images can be transferred when using bus-power external media or GPS devices.1 Open the cover.Slide the lever to open the cover.2 Remove the battery.Press the battery lock lever in the direction of thearrow to unlock, and then unload the battery.To prevent a short-circuit, be sure to always attachthe protective cover to the battery.Battery checkIcon Level (%) Status100 - 70 Sufficient battery level69 - 50 Battery level exceeds 50%49 - 20 Battery level below 50%19 - 10 Battery level is low9 - 1 Battery will be exhausted soon0 Recharge the batteryLAN At Normal Temperature (23°C / 73°F) At Low Temperature (0°C / 32°F)Wireless LAN 2100 2100Wired LAN 2400 2400Removing the batteryCOPY
