231 Basic Network SettingsThis is a connection mode when using a wireless LAN device compatible with Wi-Fi ProtectedSetup (WPS). Pushbutton Connection mode (PBC mode) makes it easy to establish aconnection between the camera and the wireless LAN device by pressing the WPS button onthe wireless LAN device.Note that if multiple wireless LAN devices are active in your area, it may be harder to establisha connection. In this case, try using [WPS (PIN mode)] to establish a connection.Confirm the position of the WPS button on the wireless LAN device in advance.It may take about one minute to establish connection.1 Select [WPS (PBC mode)].Turn the <5> dial to select [WPS (PBC mode)],and then press <0>.Select [OK] and press <0> to go to the nextscreen.2 Establish a connection with thewireless LAN device.Press the WPS button on the wireless LAN device.For details about where the button is located andhow long to press it, refer to the instruction manualof the wireless LAN device.Select [OK] and press <0> to establish aconnection with the wireless LAN device.When the connection with the wireless LAN deviceis established, the [Network] screen (p.25) isdisplayed.WPS Connections (PBC Mode)COPY
