Canon WFT-E4 Instruction Manual

Contents

Canon WFT-E4 Instruction Manual Manual pdf 21 page image

211 Basic Network SettingsWhen you select [Connect with wizard], active wireless LAN devices in your area are listed,accompanied by information about them. Select the SSID (or ESS-ID) of your desired wirelessLAN device.1 Select [Connect with wizard].Turn the <5> dial to select [Connect withwizard], and then press <0>.2 Select the wireless LAN device.To select the wireless LAN device, press <0>.Turn the <5> dial to select the wireless LANdevice, and then press <0>.Select [OK] and press <0> to go to the nextscreen.1 Indicates whether the device is in infrastructure or ad hoc mode2 An icon is displayed if the wireless LAN device is encrypting communication3 Indicates the first 9 characters of the SSID4 Indicates the channel usedEncryption by Wireless LAN DevicesIf the wireless LAN device is encrypting communication, select the corresponding method in[Authentication] and [Encryption].[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK[Encryption]: WEP, TKIP, or AES[Enter connection] and [Search again]To configure settings for the wireless LAN device manually, select [Enter connection] andpress <0>. Complete the settings for the items displayed, one after another.To search for wireless LAN devices again, select [Search again] and press <0>.Using the Wizard to Establish a ConnectionSelecting the Wireless Network1 2 3 4COPY