Canon Wireless File Transmitter WFT-E7A Instruction Manual

Also see for WFT-E7: Instruction manual Instruction manual

Contents

Canon Wireless File Transmitter WFT-E7A Instruction Manual Manual pdf 12 page image

Installing and Removing the Battery12The remaining battery power is displayed when you turn the transmitter on. A blinking batteryicon ( ) indicates that the battery will be depleted soon.Number of images that can be transferred Approx. number of imagesWhen using a fully charged LP-E6. The number of images that can be transferred is nearlythe same at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).When automatic transfer is performed during shooting of an image of approx. 5 MB underconditions based on the CIPA (Camera & Imaging Products Association) test standards.Fewer images can be transferred when transferring images continuously over a wirelessLAN.1 Open the cover.Push the lever down and open the cover.2 Remove the battery.Press the battery lock lever in the direction of thearrow to unlock, and then remove the battery.To prevent a short-circuit, be sure to always attachthe protective cover to the battery.Battery checkIconLevel (%) 100 – 70 69 – 50 49 – 20 19 – 10 9 – 1 0LAN At Normal Temperature (23°C / 73°F) At Low Temperature (0°C / 32°F)Wireless LAN 2400 2300Wired LAN 2200 2200Removing the batteryCOPY