Canon Wireless File Transmitter WFT-E7A Instruction Manual

Also see for WFT-E7: Instruction manual Instruction manual

Contents

Canon Wireless File Transmitter WFT-E7A Instruction Manual Manual pdf 27 page image

27Turn the <5> dial to select a configurationmethod for the network settings, and then press<0>.Select [OK] and press <0> to go to the nextscreen.[Auto setting]Settings otherwise configured with [Manual setting] can be configured automatically.However, the IP address and similar settings must be automatically assigned andconfigured in environments using DHCP servers or wireless LAN terminals or routerssupporting DHCP server functions.If an error is displayed, select [Manual setting] regardless of whether the IP address andsimilar settings are automatically assigned and configured.[Manual setting]The [IP address set.] screen is displayed after you select[Manual setting]. If [Auto setting] results in an error, select[Manual setting]. The IP address you enter must be the IPaddress assigned to the camera.Enter the [IP address], [Subnet mask], [Gateway], and[DNS address] on each screen as they are displayed.If you are not sure what to enter, see page 112, “CheckingNetwork Settings,” or ask the network administrator oranother person knowledgeable about the network.When entering numbers for the IP address, subnet mask,and so on, press <0> to move the input position and turnthe <5> dial to enter the number.Configuring Network SettingsCOPY