Canon Wireless Transmitter WFT-E6A Instruction Manual

Also see for WFT-E6: User guide Guide Guide Operational guide Guide

Contents

106Responding to Error MessagesThis error occurs if, for some reason, the transmitter fails to receive confirmationfrom the FTP server that image file transfer is complete.X Turn off and on the FTP server and camera and transfer the images again.Is the transmitter too far from the GPS device?X Bring the GPS device closer to the transmitter.Are any obstacles blocking the line of sight between the transmitter and the GPSdevice?X Move the GPS device to a position visible from the point of view of the transmitter.The transmitter and GPS device were disconnected, for some reason, and theconnection cannot be restored.X The connection is more likely to be lost if there are nearby wireless LAN terminals,cordless telephones, microphones, microwave ovens, or similar devices operating on thesame 2.4 GHz band used for Bluetooth communication. Also note that the connection ismore likely to be lost in poor weather or high humidity.Is the GPS device on?X Turn the GPS device on.Is the GPS device ready for the Bluetooth connection?X Turn the GPS device on and set it up for connection via Bluetooth.Is the transmitter too far from the GPS device?X Bring the GPS device closer to the transmitter.Is the GPS device on?X Turn the GPS device on.Is the same password set on the transmitter and GPS device?X The setting is case-sensitive, so check upper- and lower-case characters. Make sure thecorrect password is entered on the GPS device and transmitter.The GPS device does not support SPP (Serial Port Profile).X Confirm that the GPS device supports SPP.47: Image file transfer completion not confirmed by FTP server51: Connection to Bluetooth device lost52: Bluetooth device cannot be found53: Incorrect Bluetooth password54: No compatible Bluetooth service available on connected deviceCOPY