Canon Wireless Transmitter WFT-E6A Instruction Manual

Also see for WFT-E6: User guide Guide Guide Operational guide Guide

Contents

98If transmitter errors are displayed on the camera LCD monitor, refer to the examples ofcorrective actions in this section to eliminate the cause of the error. In case of errors, the<Y> lamp on the camera starts blinking. The error details can also be checked on the [53]tab [Communication settings] [Network settings] [Error description].Click the error number in the following chart to jump to the corresponding page.If [Waiting to retry transfer…] is displayedIf image transfer via FTP fails after shooting, thescreen on the left is displayed, and the camera’s<Y> lamp blinks in red. Check the error numberand eliminate the cause of the error.Once the cause of the error is eliminated, the imageswhose transfer previously failed will be transferredautomatically.Note that if you cancel image transfer or turn off the camera, auto retry is not performed. Followthe steps on page 36 to transfer the images.Responding to Error Messages11 (p.99) 12 (p.99)21 (p.99) 22 (p.100) 23 (p.100) 24 (p.101) 25 (p.102)26 (p.102)41 (p.103) 42 (p.104) 43 (p.104) 44 (p.104) 45 (p.105)46 (p.105) 47 (p.106)51 (p.106) 52 (p.106) 53 (p.106) 54 (p.106)61 (p.107) 62 (p.107) 63 (p.108) 64 (p.108) 65 (p.108)66 (p.109) 67 (p.109) 68 (p.109) 69 (p.109)71 (p.110) 72 (p.110) 73 (p.110)82 (p.110)91 (p.110)COPY