Canon Wireless Transmitter WFT-E6A Instruction Manual

Also see for WFT-E6: User guide Guide Guide Operational guide Guide

Contents

69Arranging the Slave CamerasDo not use multiple flash units. Although slight, there is a difference in the shutter release timingwhich may cause out-of-sync flash firing and inadequate exposure.Linked shooting is not possible when master and slave cameras are set to [Mirror lockup][Enable] or [Enable:Mirror down w/ s].During linked shooting, when you press the AE lock or depth-of-field preview button, the cameraadjusts the focus and meters as if you had pressed the shutter button halfway.Once you have established a connection between the master camera and slave cameras, thesettings are retained even after you replace the batteries.If you will no longer use a slave camera in linked shooting, set [Communication mode] to[Disconnect] on that slave camera.Any cameras compatible with linked shooting, when they have WFT series transmitters attached,can be used as slave cameras, regardless of model.COPY