35PROJECTING AN IMAGE FROM THE COMPUTERStarting ProjectionConnect the power cord and turn on the projector to start the projection.1 Connect the power cord.Fully insert the power cord plug into the socket.The [POWER] indicator flashes red.2 Press the [POWER] button.The [POWER] indicator flushes green, andthen lights in green.The countdown window is displayed forapproximately 20 seconds, and then theguiding message for the auto setup functionappears.The LED illumination lamp blinks blue until the projection is started.To project an image immediately, press the [OK] button.z Once the projector is turned off, it cannot be turned on for a while. Wait until the lamp iscooled down and the [POWER] indicator lights in red.z Enter a password if the Password input screen appears (P101, 102).z You can turn on the projector by connecting the power cord without pressing the [POWER]button (direct power on) (P97).z You can display a specified Logo on the countdown screen (P88).z You can specify whether to enable or disable the LED illumination lamp (P100).z You can skip the countdown window (P88).
