59PROJECTING AN IMAGE FROM AV EQUIPMENTProjecting a Video Image from an AV EquipmentYou can project a video image with the steps similar to those for projecting an image from acomputer.This section provides information specific to the projection from an AV equipment.For more detailed information for each step, refer to the corresponding page.1 Turn on the projector. P35*z Connect the power cord and turn on the projector (P35).z Adjust the height of the projecting image (P38).z Select a display language for the first time (P36).2 Prepare the AV equipment.z Turn on the AV equipment and start playing the video image.3 Press the button to switch the input signal. P61z Select [DIGITAL VIDEO] as the input signal.4 Press the button. P60z Adjust the input signal, focusing, keystone distortion, and so on automaticallyusing the auto setup function.5 Press the button.z Select an appropriate image mode depending on the projecting image. P50*z Select an appropriate screen mode from the [Aspect] menu. P64, 78, 79Turn off the projector. P53*z Turn off the projector and remove the power cord from the AC outlet.* Those steps are same as those for projecting the computer screen.For digital content video image:Stopping projection...
