112Converting Analog Signals into DigitalSignals (Analog-Digital Converter)Using the camcorder you can convert analog video input signals to a digital video signal (SD standard)and output it through the HDV/DV terminal.Open the menu and select [SIGNAL SETUP]. Select [AV DV], set it to [ON] and close themenu. Depending on the signal sent from the connected device, the conversion from analog to digitalsignals might not work properly (e.g., signals that include copyright protective signals or anomaloussignals such as ghost signals). For normal use, set [AV DV] to [OFF]. If it is set to [ON], digital signals cannot be input via thecamcorder’s HDV/DV terminal. Depending on the software and the specifications of your computer, you may not be able to transferconverted signals via the HDV/DV terminal. We recommend powering the camcorder from a household power outlet. You can also press the AV DV button on the wireless controller. Repeatedly pressing thecontroller’s button will toggle the AV DV conversion on and off.MENU( 31) SIGNAL SETUP AV DV•••••••• OFF