82Using the Custom PresetYou can define preset levels for 23 recording specifications used when recording on tape (17 whenrecording still images on the memory card). Up to 6 custom presets can be stored on the camcorder, andup to 20 can be stored on the memory card. You can copy the camcorder’s custom presets to thememory card. Also, while you are recording on the tape and simultaneously record a still image on thememory card, the current recording specifications can be saved as a custom preset on the card. Lateryou can load that custom preset from the memory card to the camcorder.The recording specifications that can be saved in a custom preset:Gamma curve*, knee, black stretch/press, master pedestal*, setup level*, sharpness, horizontal detailfrequency, horizontal/vertical detail balance, coring, NR1*, NR2*, color matrix*, color gain, color phase, Rgain, G gain, B gain, R-G matrix, R-B matrix, G-R matrix, G-B matrix, B-R matrix and B-G matrix.* Available only when recording on the tape.Gamma Curve [GAM] (only in CAMERA mode)You can select from [NORMAL], [CINE1] or [CINE2].Knee Point Adjustment [KNE]Adjust the dynamic range (knee point) in the highlightarea of the image to prevent overexposure. You canselect from [AUTO], [HIGH], [MIDDLE] or [LOW].Black Stretch/Black Press [BLK]Adjust the dynamic range in the black area of the image.You can select from [STRETCH], [MIDDLE] or [PRESS].[STRETCH] emphasizes contrast in the dark area, while[PRESS] enhances or deepens darkness.InputOutput[NORMAL]Representation of the setting[CINE1][CINE2]InputOutputRepresentation of the setting[HIGH][MIDDLE][LOW][STRETCH][PRESS][MIDDLE]
