10AE SHIFT dial ( 62)Remote sensor( 24, 95)Tally lamp ( 83)Screw hole foradapter holder ( 21)Battery attachment unit ( 13) /serial numberScrew holes foradapter holder ( 21)Microphone cable ( 20)Grip belt ( 21)Start/stop button ( 32)Tripod socket*Grip zoom lever ( 38)Remote sensor ( 24, 95)Videoterminal (RCA)( 88)XLR inputterminals( 51, 52)ZOOM SPEED switch ( 38)Zoom speed dial ( 38)Tally lamp ( 83) /Remote sensor ( 24, 95)FRONT MIC terminals ( 20)EVF DISPLAY button ( 35)S-videoterminal( 87)Videoterminal (BNC)( 88)AUDIO 2RCA terminals( 52)AUDIO 1RCA terminals( 51)RCA/BNCselector( 88)Backup battery compartment( 16)BATT. RELEASE button ( 13)Cassette compartment ( 25)Lens hood locking screw( 23)CUSTOM KEYS ( 74)CUSTOM PRESET ON/OFF button ( 70)EJECT switch ( 25)CUSTOM PRESET SELECT button ( 70)About the m Terminalm (LANC) stands for Local Application Control Bus System. The m terminal allows you to connect and controlconnected devices.❍ Connect only devices with the m mark to the m terminal.❍ Operation cannot be guaranteed for connections with devices not bearing the m mark.❍ Some buttons of connected devices may not operate or may operate differently than the buttons on thecamcorder.* Do not use tripods with fastening screws longer than 0.2 inch (5.5 mm) as it may damage the camcorder.Downloaded From VideoCamera-Manual.com Manuals
