48❍ When setting the free-run time code, the time code starts to run when you press the MENUbutton in the middle of the setting, or when you press the SET dial after setting the last digits.❍ To reset the time code to [00:00:00:00], select [RESET] in step 2.❍ In 24p mode, the frame of the time code is set in multiples of 5. When you change to 24p from60i/30p, the starting point will automatically become a multiple number of 5.❍ When you mix drop frame and non-drop frame time codes, the time code at recording start maybe discontinuous.❍ When recording over existing scenes: When a time code discontinuity occurred near the recordingstart point, the time code at recording start may be discontinuous.❍ When the backup battery is installed, the free-run time code continues to run even when youdisconnect the battery pack.Downloaded From VideoCamera-Manual.com Manuals
